Abrasive Wheels

Used for stock removal, satining, polishing and finishing in the following sectors:

Sander Wheels

Steel
Polishing and finishing off welds
Satining and polishing of surgical instruments
Polishing and finishing of surgical prostheses
Satining and sharpening of knives and scissors
Satining of watch straps
Polishing and finishing of jet engine turbine blades
Smoothing and finishing of spectacle frames
Finishing of worm screws for plastic injection moulding machinery

Titanium
Polishing and finishing of surgical prostheses
Finishing of dental screws
Smoothing and finishing of specatcle frames

Non ferrous metals
Satining of copper and brass sheet
Satining of aluminium tubes
Polishing of zinc alloy parts

Precious metals
Finishing of the inside of gold and platinium rings
Finishing of gold items
Smoothing of silver jugs and plate

Wood
Smoothing and finishing of untreated wood frames and profiles
Smoothing and finishing of painted wood frames and profiles

Ceramic
Polishing of ceramic coatings
Removal of excess green glaze on tiles
Polishing of green porcelain stoneware tiles
Finishing of gold decorations on plates

Glass
Finishing of flat wire
Finishing of round wire

Freecut Wheels

Steel
Polishing of jet engine turbine blades
Satining of circular cutting blades for wood and diamond tools
Finishing of drill bits
Grinding and polishing of flatware
Finishing of welds

Non ferrous metals
Satining of plates for brass handles

Ceramic
Polishing of ceramic coatings
Removal of excess green glaze on tiles
Polishing of porcelain stoneware tiles
Polishing of green poreclain stoneware tiles
Finishing of decorations on plates

sander and freecut wheels elastomeric wheels drako and drakosander wheels sander and freecut tapered conical points sander and freecut mounted points sander mottling cylinders sander depressed centre wheels sander and freecut abrasive pads ghibli and freecut cup wheels conical rollers cylindrical rollers
1              
2        
3                
4            
5              
6                
7        
8              
9                  
10                
11              
12                
13                    
14



KEY
1 : aeronautical engineering
2 : mechanical engineering
3 : electronics industry
4 : fine jewellery
5 : costume jewellery
6 : eyewear
7 : hardware
8 : taps
9 : flatware
10 : surgical prostheses
11 : cutlery industry
12 : wood industry
13 : glass industry
14 : ceramics industry

Product Type

Sander

Bonding Agent

PL - Flexible foamed polyurethane

Abrasive

Aluminium oxide - grit sizes F.16 to F.320
Silicon carbide - grit sizes F.16 to F.1200

Stiffener

Glass fibre nets, on request

Freecut

Bonding Agent

PL F - Foamed and non-foamed rigid polyurethane

Abrasive

Aluminium oxide - grit sizes F.16 to F.320
Silicon carbide - grit sizes F.16 to F.1200

Stiffener

Glass fibre nets, on request

Available Hardness

Sander - 35 to 95 shore A
Freecut - 30 to 90 shore D

   

Sharmic Engineering Ltd, Baldwin Road, Stourport-on-Severn,
Worcestershire, England, DY13 9AX, UK
Tel: +44 (0)1299 822135/878123/4/5   Fax: +44 (0)1299 879409   E-mail: info@sharmic.co.uk

site design by bf internet